Schizophrenia

About the blog

[UPDATE: it turns out there are even simpler and less expensive ways to build a working apparatus..  Will provide instructions for it soon. 02-16-2022 08:57 PM]

[NOTE: Resonance may be critical for the apparatus to function properly.  That means 2 or more of each Bluetooth, WiFi router, or cell phone - each oriented so their respective antennas are in an x/y or x/y/z or x/z or y/z configuration.  The instructions have  been updated to reflect this. 01-31-2022 07:50 PM]

[UPDATE: Added a note about using omni-directional speakers due to how much better and clear the sound they produce is.  They aren't critical to this working though.  Just helpful once a recording has been made. 01-29-2022 12:25 PM]

[UPDATE: One item was accidentally left off the list.  You'll also need a variable speed fan with metal blades to step ultrasound down into audible sound.  It's been added to the original list below and highlighted. 01-23-2022 05:07 PM.]

[NOTE: Related posts are Pictures and Sounds.]

   Would you like to know how schizophrenia works?

   It's not what's going on in the mind that I'm referring to.  It's what's going on in the country which can trigger that mental illness and quite a few others.

   If you're just curious about what's being done to us every second of every day - both day and night - but don't have any interest in spreading garbage on the floor, here's a link to the recordings:

• Sounds found throughout St. Louis

   Explaining it with words may be one of the most difficult things a person can try to accomplish.  So I'll explain it with pictures, a parts list, and some basic instructions for anyone else who'd like to know how schizophrenia works.

The parts list is as follows:

• 1 or 2 cell phones with support for Bluetooth
• 2 Bluetooth speakers
• They don't need to be omni-directional. But that type seems to produce better results once you've recorded something unusual and play it back.
• 1 voice recorder
• Should have no wireless capabilities and can NOT be a cell phone.
• That would introduce so much static into the recording that hardly anyone else would be able to hear any patterns in it until they'd lived (as in slept there every night consistently) in the same area it was recorded for somewhere around 4 to 6 months.
• A variable speed fan with metal blades (for stepping ultrasound down to audible sound.)
• NOTE: Assuming you have a furnace, air conditioner, stove top exhaust fan, etc. it can take the place of a variable speed fan - and will probably do so  no matter how much you try to prevent it.  Try locating your apparatus near to one and have it running.
• A metal wireframe trashcan.
• The bottom part of a metal cookie tin.
• 1 guitar amp with at least 1 speaker.
• The metal fabric screen that reduces electromagnetic interference should be removed.
• A piece of cable at least half a foot long with a connector for the guitar amps INPUT port on one end but bare wires on the other end.
• 10 of the biggest neodymium N50 magnets you can find - 100 x 50 x 25 mm should do it.
• 50 x 25 x 10 mm should also work - it's just a really strong magnetic field that's needed.

   Now should the apparatus built from that list not find the result we're searching for, here's the upgraded parts list which takes advantage of resonance to boost it's power.  This also increases the amount of noise you'll hear but simple ways exist to deal with that.

The upgraded parts list should include:

• 3 Bluetooth speakers instead of just 2.
• They will need to support the ability to link one to the other or else you'll need 2 cell phones to stream to them.
• If you have a fancy phone that can stream to multiple Bluetooth speakers at once then you're good.

There's still a chance that the upgraded apparatus built from the parts list won't find the result we're searching for.  Should that be the case,there's an upgraded upgraded parts list.  It takes advantage of resonance for Bluetooth and resonance for cell phones so covers more frequencies.

• 3 cell phones with service instead of just 2.

If you wondered if there's an upgraded upgraded upgraded parts list - there sure is.  You need 3 WiFi routers for the cell phones to connect to.

• 3 WiFi routers

   Of course there needs to be an ultimate parts list.  And there is.  For that you'll need to combine everything up this point :

• 3 Bluetooth speakers
• 3 cell phones with service
• 3 WiFi routers

   Those wireless devices in a 3 axis configuration with respect to each set of 3's antennas will cover more frequencies for the search and amplify their power significantly.  So that's 3 Bluetooth speakers arranged in an antenna based 3 axis configuration, 3 cell phones yadda yadda, 3 WiFi routers...  I'm sure your catching on by now.

   The secret is in the way that garbage can be just laid out on the floor to accomplish something unbelievable.

   The next post will illustrate how to do that.